SuperPar

As a Mold Stain Remover Only

1. Apply SuperPar to the point of saturation.
2. Allow a wet dwell time of up 5 minutes.
3. Wipe or extract all raised soil load from the surface.
4. Reapply and wipe/extract if needed.

As Step 2 of the REACT|EXTRACT™

1. Apply SuperPar (follow OxyPrep) to the point of visible neutralization (foaming is the visual indicator).
2. Allow a dwell time of up to 5 minutes.
3. Wipe or preferably vacuum extract the soil loaded foam from the surface.
4. Repeat if necessary.

R|E™ Fire/Water/Biohazard Cleanup

1. Apply SuperPar (follow OxyPrep) to the point of visible neutralization (foaming is the visual indicator).
2. Allow a dwell time of up to 5 minutes.
3. Extract, wipe, mop based on substrate, efficiency and severity.

After fire remediation apply VaporLock to odor seal.
After water or biohazard cleanup apply Fortify prevent microbial growth on the coating surface.

Exterior Surface Application

1. Apply SuperPar (follow OxyPrep) to the point of visible neutralization (foaming is the visual indicator).
2. Allow a dwell time of up to 5 minutes.
3. Extract or rinse based on substrate, efficiency and severity.

After cleaning, apply X4 for passive moisture control.