May's newsletter is out! ✉️

WhiteCap Base Coat

Price range: $99.00 through $425.00

WhiteCap Base Coat is engineered to be the first step in your high-performance commercial roof restoration maximizing adhesion and longevity in even the most demanding environments.

Description

Features

✅ 5 Gallons
✅ Excellent exterior durability for long-lasting protection
✅ Superior UV resistance to prevent premature degradation
✅ Cold-weather flexibility down to -15°F (-26°C)
✅ Dirt pick-up resistance helps maintain appearance over time
✅ Outstanding adhesion to SPF and various construction substrates
✅ High solar reflectivity helps lower surface temperatures, reduce energy costs, and extend roof lifespan
✅ High tensile strength and elongation ensures performance in extreme climates
✅ Easy application by spray, brush, or roller for cost-effective installation
✅ Low toxicity and minimal odor for safer use in occupied spaces
✅ Water-based formula allows for simple cleanup

 

Additional information

Dimensions 12 × 12 × 16 in
Size

1 Gal, 5 Gal

Instructions

  1. Apply WhiteCap Base Coat at a rate of 120-130 square feet per gallon (12-14 wet mils).
  2. Allow to cure to 12 hours.
  3. Inspect WhiteCap Base Coat for defects, flaws or areas of insucient coverage, and correct unsatisfactory conditions. If necessary, correct and allow to cure before TopCoat installation.
  4. Complete the Phoenix Liquid-Applied Commercial Roofing System by applying WhiteCap Top Coat according to both labeling and Phoenix Standard Operating Procedures and Original Roof Type.

OB Assessment & Substrate Preparation

  1. Prior to installation, review the Phoenix Coatings Standard Operating Procedure associated with your roof resurfacing project.
  2. Inspect and complete a Phoenix Moisture Assessment of the existing roof system for structural deficiencies and needed repairs according to local building code requirements.
  3. Repair all deteriorating membrane, ponding water areas, deteriorating seams, pitch issues, condensation lines, flashing deficiencies, and penetrations prior to installation.
  4. Clean the existing roofing substrate according to Phoenix Standard Operating Procedures and allow to dry prior to installation.
  5. Ensure that weather and temperature conditions are suitable prior to the installation of WhiteCap Base Coat.
  6. Conduct adhesion testing per Phoenix Standard Operating Procedures prior to WhiteCap Base Coat installation.
  7. If recommended in Phoenix Standard Operating Procedures, prime existing roofing substrate(s) prior to WhiteCap Base Coat Installation.

Reviews

There are no reviews yet.

Be the first to review “WhiteCap Base Coat”

Your email address will not be published. Required fields are marked *

Purchased Together

You May Also Like