Description
Features
✅ 1g Tablets
✅ EPA-registered
✅ Easy to use concentrated tablets
✅ Effective at 100 ppm with a 5-minute dwell time as a biocide, fungistat, algaestat, mildewstat, and slimicide -Virucidal and sporicidal at 400 ppm with a 1-minute dwell time*
✅ Leaves no film or residue on hard, non-porous surfaces
✅ Plant & animal safe
Compatibility
Compatible with:
✅ Enviroguard Cleaners & Stain Removers
✅ Dutrion Tablets & Powders
✅ Enviroguard Equipment
✅ FOAMiT Equipment
✅ Premira Equipment
✅ Titan Tool Equipment
Instructions
Directions for Disinfection Use
[For Industrial Applications and Stock Solution Uses, See Industrial Use Instructions]
Product has a linear concentration, independent of volume of water or target PPM. It is a violation of federal law to use this product in a manner inconsistent with its labeling. The product label must be in possession of the user at the time of application. Read the label before using this product.
[TO DISINFECT, DEODORIZE, AND CLEAN HARD, NON-POROUS SURFACES]
For all applications, directly apply by mop, sponge, spraying apparatus, ensuring visible application for time specified or apply through immersion or clean-in-place application. For visibly soiled including heavily soiled surfaces: Remove visible filth and other debris by mechanical means. Thoroughly brush and clean using prepared solution or other cleaning solution then rinse with potable water.Tablets and liquid solution must be handled with care and all procedures must be followed according to the product label and the SDS (SafetyData Sheet).General Safety Guidelines:Read Dutrion Tablet SDS first. Always be aware of product fumes during mixing. Do not inhale above open containers. Maintain ventilation inroom during preparation and storage. Close container quickly and tightly. Ask your supplier before opening package for dosage.
1. Fill appropriate container with specified amount of tap water
2. Slowly add 1 Gram Dutrion Tablet for each Quart/Liter of Water. Do Not add water to tablets. Tablet => Water
3. Wait 2 minutes, shake, or stir gently. [Solution is ready to use.]
[INDUSTRIAL DIRECTIONS FOR USE]
Prepare a Dutrion Tablet 2,000 ppm chlorine dioxide Industrial Stock Solution (= 0.2%)]Product has a linear concentration, independent of volume of water or target PPM. It is a violation of federal law to use this product in a manner inconsistent with its labeling. The product label must be in possession of the user at the time of application. Read the label before using this product.
TO DISINFECT, DEODORIZE, AND CLEAN SURFACES AND WATER TREATMENT
For all applications, directly apply by mop, sponge, spraying or dosing apparatus, ensuring visible application for time specified or apply through immersion or clean-in-place application. For visibly soiled including heavily soiled surfaces: Remove visible filth and other debris bymechanical means. Thoroughly brush and clean using prepared solution or other cleaning solution then rinse with potable water.
Tablets and liquid solution must be handled with care and all procedures must be followed according to the product label and the SDS (SafetyData Sheet).
General Safety Guidelines:
Read Dutrion Tablet SDS first. Always be aware of product fumes during mixing. Do not inhale above open containers. Maintain ventilation inroom during preparation and storage. Use safety gear (goggles and gloves.) Close container quickly and tightly.
Follow the steps below to prepare Dutrion Tablet Stock Solution.
1. Fill appropriate container with specified amount of potable water
2. Slowly add correct number of Tablets to Water. Do Not add water to tablets. Tablet => Water
3. Wait 2 minutes, shake, or stir gently.
Dutrion Tablets (20 grams / 0.71 oz) are designed to be mixed with a specified amount of tap water to create an effective disinfecting solution.
- When used at 100 PPM, Dutrion acts as a broad-spectrum disinfectant
- When used at 400 PPM, Dutrion functions as a virucide
Preparing a Stock Solution (Industrial Use)
To simplify dilution for industrial applications, first prepare a 2,000 PPM stock solution:
- Add 1 Dutrion Tablet (20 grams) to 1,000 mL (1 quart) of tap water
Allow the tablet to fully dissolve before use.
Diluting the Stock Solution for End Use
Once the 2,000 PPM stock solution is prepared, dilute it with water according to the desired final concentration:
| Target Concentration |
Mixing Ratio (Stock : Water) |
| 400 PPM |
1 : 5 |
| 200 PPM |
1 : 10 |
| 100 PPM |
1 : 20 |
| 2 PPM |
1 : 1,000 |
| 1 PPM |
1 : 2,000 |
Used for
-
- Mold remediation
- Water damage remediation
- Fire damage remediation
- Sewage cleanup
- Deodorization
- Air freshening
- Water treatment
- Agricultural
- Veterinary
Use claims
When used as directed, Dutrion Tablet is proven effective against Pseudomonas aeruginosa, Staphylococcus aureus, Klebsiella pneumoniae, Salmonella enterica, odor causing bacteria, fungi, mold, and mildew. A 5 minute dwell time at 100 PPM is required.
Dutrion Tablet is also effective against Rotavirus (ATCC VR 2018) with a 1 minute dwell time at 400 PPM
Reviews
There are no reviews yet.