Fortify

Description

Features

✅ Concentrated
✅ Breathable to prevent dry or wet rot conditions
✅ Applies and dries to a semi-transparent finish for quality control
✅ Acts as a moisture barrier to prevent moisture content increases
✅ Forms a tough, resistant barrier to moisture and contaminants
✅ Tintable, Water-based and non-flammable
✅ Mold & moisture resistance on contact
✅ Breathable formula allows safe moisture release
✅ Sprayable: pump or airless application
✅ Safe for use on wood, masonry, wall cavities & more
✅ Adds long-term value in both remediation & construction

Coverage

One 5-gallon pails of Fortify makes 15 ready-to-use gallons of sealant. Each ready-to-use gallon will cover up to 300 ft2 for a total of 4500 ft2 per pail of concentrate. Final coverage is based upon location, surface texture, porosity, age and application method. For best results, directionally fog onto surfaces to the point of run-off.

Instructions

Fortify Disaster Response should be applied directly to the surface to the point of saturation but not past the point of runoff.
Once diluted, Fortify is a low viscosity sealant.
Apply the diluted solution of Fortify with a pump sprayer, fogger, electrostatic sprayer, or airless sprayer, or any other similarly manual or powered equipment.

For storm and water damage response

Use a 2:1 dilution (2 parts water to 1 part Fortify).
Apply to the point of runoff at a rate of up to 300 ft² per gallon of ready to use solution.

Disaster Response

Ideal for use after storms or floods, Fortify helps restorers move quickly even when structural moisture levels are slightly elevated. Its breathable formula allows moisture to escape while resisting condensation, humidity, and mold before rebuild.

Construction Control

From the lumber yard to the job site, Fortify™ protects framing, subfloors, joists, and sheathing from moisture related mold. Spray before dry in to avoid delays, cleanup costs, or remediation after sale. Includes a 12 month builder warranty.

Annual Maintenance

Fortify Maintenance is a foggable booster treatment that refreshes antimicrobial and moisture resistance levels in unconditioned or hard to access areas. Use it to maintain performance of ClearGuard™, MaxGuard™, or MasonryGuard™ during yearly inspections.