Transform Remediation With REACT|EXTRACT™
Unlike single performance products that offer one benefit, REACT|EXTRACT™ uses a neutralization reaction to eliminate surface staining while lifting and suspending contaminants for vacuum extraction. The process guarantees a completely clean, beautifully restored environment with neutralized, corrosion and residue-free surfaces.
How REACT|EXTRACT Works
A three-step process that uses chemical neutralization for faster, more effective remediation.
Preparation
OxyPrep pre-treatment is applied to saturate the soil load and substrate. Initial visual restoration occurs on contact.
Reaction
OxyPar neutralization creates a visible, exothermic reaction that lifts all soil load into a shaving cream-like foam on the surface.
Extraction
Vacuum extraction removes the soil load from the surface, prevents cross contamination and leaves a completely clean surface.
new react|extract bundle
Stop Scrubbing
Start Reacting
Our new REACT|EXTRACT™ bundle brings together the essential tools for fast, reliable mold and allergen detection. Streamline your workflow, save valuable time, and get everything you need in one convenient bundle.
Remediation is a Process of Controlled Dilution
SOURCE REMOVAL:
Water sources are identified and eliminated.
CONTAINMENT
Contaminated areas are sealed off from non contaminated living and working spaces.
NEGATIVE AIR / AIR SCRUBBING
Airborne contaminants are captured using filtration down to three microns.
HEPA VACCUMING
Loose debris and heavy soil load are removed in a controlled manner.
CLEANING
Affected surfaces are manually cleaned and treated with an antimicrobial to remove mold. This step is labor intensive, costly, and often requires occupants to leave the space.
HEPA #2
After drying, surfaces are vacuumed again to remove remaining or resettled particles, adding time and labor to the process.
RECURRENCE PREVENTION
Moisture control measures are installed to reduce the risk of future mold growth.
Source Removal, Containment, Negative Air, and HEPA
All standard quality control steps remain the same, including water source removal, containment, and airborne contaminant control.
REACT|EXTRACT Cleaning Process
OxyPrep and OxyPar chemically neutralize contamination, replacing manual scrubbing and surface wiping with greater precision. Vacuum extraction occurs during the wet stage, eliminating the need for additional drying time and repeat HEPA vacuuming.
This process reduces labor by sixty to seventy percent, allowing the same crew size to complete two to three times more jobs while improving team retention.
Recurrence Prevention
Moisture control measures are installed to help prevent future mold growth.
Features & Benefits
A remediation process that transforms productivity, results, and profitability
Eliminates Staining on Contact
OxyPrep pre-treatment is applied to saturate the soil load and substrate. Initial visual restoration occurs on contact.
Lifts & Suspends Contaminants
Oxypar neutralization creates a visible, exothermic reaction that lifts all soil load into a shaving cream-like foam on the surface.
No Chemical Residues
No corrosion, over-drying, or residue. Neutralization protects wood surfaces and delivers complete results without the downsides of harsh, single-performance chemicals.
Prevents Cross-Contamination
Wet stage extraction allows for more control, preventing the spread of contaminants.
Completely Clean Surface
Leaves behind a visibly clean, dust-free surface per IICRC S-520 standard guidelines.
60-70% Faster
Complete jobs in a fraction of the time with superior results compared to out-dated methods.
REACT|EXTRACT Services
Mold
Escape the grueling headaches and outdated methods that most mold remediators suffer through. REACT|EXTRACT won’t only make you more profitable on jobs you’re doing, but it will allow you to grow to three times your present size with the same size team.
Fire
Because REACT|EXTRACT reacts, lifts and suspends soot into the foam that forms during the neutralization reaction, chem sponges can be greatly reduced (especially on structural surfaces), eliminating an arduous and time-consuming step from the fire damage restoration process.
Water
Category 2 and Category 3 water jobs differ by contamination type, each presenting its own challenge. When the real issue is soil load, REACT|EXTRACT delivers faster cleaning, better quality control, and more reliable results across every project.
Other
Anywhere cleaning efficiency is needed, REACT|EXTRACT can be applied. We’ve supported Appalachian State University with tile and grout shower restoration, and partnered with trauma and crime scene cleanup teams to integrate the service into their workflow.
Step 1
OxyPrep
Pre-Treatment STAIN REMOVER
OxyPrep is the first step in the REACT|EXTRACT process. This pre-treatment solution penetrates and saturates the soil load and substrate, preparing surfaces for the neutralization reaction.
- Eliminates mold staining on contact
- Provides initial visual restoration immediately
- Pre-wets soil load for optimal reaction
- Penetrates substrate for deep cleaning
- Perfect for Mold Severity Indexes 2-5, Category 2-3 Water Damage, and Structural Soot Removal
Step 2
OxyPar LR
Neutralizing Cleaner
OxyPar LR is the second step that creates the chemical neutralization reaction with OxyPrep. This ready-to-use cleaner reacts on contact, creating a visible foam that lifts and suspends all contaminants for easy extraction.
- Exothermic reaction drives soil load into resulting foam
- Returns pH to 7, preventing corrosion and over-drying
- Ready within 2-3 minutes for extraction
- Surfaces are clean with no chemical residues left behind
Heavy Duty Pump Sprayers
& Foamers
Manual heavy-duty pump sprayers for small jobs to maintain the similar quality control (fan width and output) to BTM Systems.
Dual Powered Pump Sprayers
& Foamers
Hybrid pump sprayers and foamers that can be connected to a portable air compressor to eliminate manual pumping and increase efficiency and speed
BTM Sprayers
& Foamers
Dual hose and gun system allows two technicians to work within 2 minutes of one another, dramatically increasing efficiency and profit on every job.
Sunesis calls REACT|EXTRACT
“A Miracle”
“After years of utilizing Enviroguard products we finally decided to make the investment in the BTM electric spray system. A project that would normally take approximately 32 man-hours to perform was completed in 5 man-hours. Our employees loved the BTM sprayer; it was easy to use and easy to clean.”
— Lyndsey W, Virginia
I want to learn more about React|Extract
Ready to Stop Sounding Like Every Other Remediation Company?
Join the mold, water, and fire restoration contractors who are doubling their sales through true service differentiation
Questions?
Call us at (828) 548-3900
or email info@enviroguarddirect.com