Description
Coatings and sealants can be difficult and messy to remove. P.U.C. Remover was formulated to make the job fast and easy. From polyurethanes and urethanes to latex-based coatings and caulks, P.U.C. Remover begins stripping paints, coatings and sealants from surfaces in minutes!
Formulated to Remove
- Paint
- Polyurethane
- Acrylic Caulk
- Epoxy
- Varnish
- Shellac
Coverage
Each ready-to-use gallon of P.U.C. Remover is expected to cover between 50 – 120 square feet per gallon. The coverage will vary.
Instructions
Remove paints, coatings & sealants
- Apply P.U.C Remover directly to the finish.
- Allow to dwell for 15-30 minutes until the surface is nearly dry by sticky to the touch.
- Re-wet the surface with P.U.C. Remover.
- Allow to dwell for 2-3 minutes.
- Wipe paint, coating, or sealant from the surface.
- Repeat if needed.
To reach embedded mold stains
- Once polyurethane has been removed, test with OxyPrep for mold stain removal.
- If successful, immediately neutralize with Oxypar to lift any soil load.
- Wipe or remove from surface.
- Repeat if necessary.
- Re-coat with polyurethane to seal.
Application Tools
For quarts, use the accompanying trigger spray nozzle and apply to the point of saturation. For gallons or larger, use in a pump-style sprayer that permits changeable tips for managing both fan width and output.
Reviews
There are no reviews yet.