Search Results

WHAT IS TRITANIUM™? Found in both Enviroguard Coatings and Phoenix Liquid Applied Roofing Systems, TRITANIUM™ represents convergent Antimicrobial, Ceramic, Titanium and Resin technologies that produce exception protection, durability and elasticity. Marine-grade Antimicrobial - Protection A non-leaching, submersible EPA registered biocide glides on the polymer strands of our coating system to offer protection to areas of greatest moisture. It's durability provides for performance longevity while also preventing against migration and contamination into the environment. Ceramics | Titanium - Durability A four micron suspension that maximizes abrasion resistance, heat/UV resistance, impact resistance, solar reflectivity, and dirt pickup resistance. In five-year testing of roofing applications, the technology consistently reduced surface temperatures by 35 degrees when compared with conventional polymer coatings and 85 degrees as compared with black EPDM and torch-down roofing. Acrylastomer Resin - Elasticity A non-VOC polymer that upon curing, aligns and forms a nano-fiber skeletal structural yielding the highest elongation strength (pulling resistance) and tensile strength (tearing resistance), found in this category. It maximizes low temperature flexibility and provides a broad range of substrate adhesion options while also allowing future re-coat for maintenance. To learn more about the Enviroguard products using TRITANIUM™ to enhance protection, durability and elasticity, click on a link in the carousel below. SafeGuard White, MasonryGuard, MaxGuard and VaporLock White are built with TRITANIUM™. TRITANIUM is a shared trademark of Enviroguard Corporation and Phoenix Coatings, LLC. All rights reserved. Copyright 2024

What does it look like to become an Enviroguard distributor? What does it mean to be a part of our team? These are some crucial questions to ask yourself if you are looking at investing into our enterprise. We want to walk you through the key steps of distributorship and important aspects to ponder. Distributorship means more than just a dealer to us. It is a partnership. When joining our team, we value the crucial insights that you have to the industry. Also, we are here to support you every step of the way -- from launch to being well-established. Not only do we want to prepare you to be profitable, we also want to prepare you to be the best you while you are doing it. So, who should join our team? People who have an entrepreneurial passion and who are enthusiastic about the chemical remediation industry. INVESTMENT Investing in Enviroguard is more than just a monetary investment. It is investing in a brand that cares about the industry and bringing its customers the top performance through hard work and dedication. It is an investment that gives back. Are you eager to leave customers feeling supported and cared for in a way they never have before? Then maybe this is the partnership for you. You and your distributor team will be investing in the remediation industry by supplying the best practices and products to customers. Although, you probably want to know about the monetary investment too. How much will this cost and what do you need to invest? Here are the beginning assets needed: License Fee: $15k Initial Inventory: $20k-$30k Store Location: Approximately 800-1500 sq. ft. Total Investment Range = $40k-$90k NET WORTH As an Enviroguard Distributor you will need to have a minimum of $250,000 in liquid assets and a net worth of 500k per distributorship. You may also consider purchasing an existing Enviroguard Distributorship by meeting the minimum financial requirements for your desired market. We want to make sure you have a good starting place and the capacity to begin a distributorship successfully. WHY ENVIROGUARD? Why should you want to invest in Enviroguard? Our commitment is to bringing the market the right products, training, and support! We are passionate about understanding the chemistry behind our products. In order to supply our customers with the best, we have to understand it. Mark Maier, our founder and CEO, has worked in the chemical textile industry for the majority of his career. He deeply understands the products and is involved with the formulation process for each one. His vision is to create products for contractors that are the best and help them preform the best. Our products help contractors generate revenue and create efficiencies. Training is a core element of what we do at Enviroguard and it comes in many forms -- it goes beyond just product training. We want to supply our customers with technical understanding while also aiding them in areas of business development and marketing. We believe that providing a holistic view of processes in the industry from safety, to sales, to techniques. We believe this is the best way to see our customers succeed. We can teach you how to make training one of your greatest strengths too! And, you will help us supply more people with beneficial training in order to revolutionize the industry. No matter what, we want to provide the right support to all of our customers; whether that is bringing them life-changing products, walking them through a job, or supplying them with marketing/sales aids. Our customer's success is our success. We will teach you how to bring outstanding support to your region. TRAINING So what does becoming a distributor look like in a tangible sense? After you submit an application, we will go through a process of reviewing and approving. If your application is approved, you will meet with us to discuss your business plan. You will be expected to supply us with a business plan, financial information, and a background check. Once these things are approved, we will help you designate a physical location and work through the Enviroguard Distributor Agreement. Once signed, it will be time to finalize everything, train your team, and launch! Training will be a week long process at our head-quarters in Banner Elk, NC. You will be equipped with all the knowledge you need to begin: sales tools, system operations, product training, shipping information, and more! But don't worry, we know that is a lot to take in in one week and will be there to walk alongside you afterwards too. For the first week of your launch, Mark will visit your location to help get things running smoothly and host kickoff events such as open houses, certification trainings, and/or workshops. Can you envision yourself working with us? Do you think you are the right fit? Fill out an application today to begin the preliminary conversations. We can not wait to hear from you! You can fill out a form here: https://www.enviroguarddirect.com/distributorships

It is always important to be dressed properly for the job you are going on. At Enviroguard we recognize that safety is a top priority. We want to make sure you and your team are educated on how to suit up properly. When it comes to water remediation, we also want to make sure you are staying dry! Following proper PPE protocols and understanding the materials can deeply help you in this endeavor. In this article we will go over different types of suits, types of respiratory gear, gloves, and a bonus for water remediation. First, when preparing for a job there are a couple of questions you need to ask yourself: 1) Will you be using products that are non-oxidizers or oxidizers? 2) What type of exposure environment will you be in? Incidental, direct, or prolonged? Once you answer these questions, you can use this table to guide you in the right direction! So, what are oxidizers? Oxidizers are chemical compounds that let off oxygen or other readily combustible particulates. Essentially, products that contain oxidizers are more prone to creating fires, are hazardous, and not good to breath in; so, it is important that you have the correct respiratory gear. Also, what are exposure levels? Let's break them down. An incidental exposure level is when the likelihood of chemical contact is minimal. An example of this is working in an open-framed environment. A direct exposure level is when you expect the occasional spray and splash. An example of this would be working in a closed space (specifically where chemical is less that three feet from you). A prolonged exposure environment is where chemical contact is continuous and spray/splash is certainly expected. N-95 Masks Organic Vapor with P/100 Multi-Gas / Multi-Vapor with P/100 *It is important to make sure that you have the right cartridge when working with oxidizers. If you are working with oxidizers, you need to use the multi-gas/multi-vapor cartridge. If you can smell anything then you have the wrong cartridge -- make sure it is not an organic cartridge. 45-55 G Micropourus - A breathable, non-woven material that resists dirt and non-oxidizer incidental chemical contact alone. Polypropylene - A non-breathable, non-woven material that resists 480+ minutes of non-oxidizer prolonged chemical exposure as well as incidental oxidizer contact. Saranex - A non-breathable, non-woven material that resists 480+ minutres of prolonged chemical exposure from oxidizers.

Shop By Product Cleaners + Stain Removers Coatings & Sealants Disinfection + Odor Control Personal Protective Equipment Equipment + Accessories Apply Today

Mold Severity Indexing™ ensures consistency, from assessment through job completion. Learn more Enviroguard Coatings, now with the power of TRITANIUM. Learn more PRODUCTS Cleaners + Stain Removers Coatings + Sealants Disinfection + Odor Control Personal Protective Equipment Equipment + Accessories What Our Customers Say Enviroguard is our supplier of choice for restoration and remediation cleaning supplies and chemicals. Anytime we have a question about a particular job, Mark and his team are always willing to help and solve our issues. They are not just another supplier, but a partner in the industry! Zakhar K., OH NEED A QUALIFIED CONTRACTOR? Since 2005, we've worked with the most capable, conscientious and professional contractors in the nation. Now you can work with them too! Enviroguard Certified Master Systems Installers are trained to understand and solve your problems in a six step, no pressure process designed for your confidence and peace-of-mind. How Can We Help? MOLD REMEDIATION MOISTURE CONTROL ODOR REMOVAL WATER DAMAGE FIRE DAMAGE HIGHLIGHTED PRODUCTS Why Enviroguard Cutting Edge Products We stay on top of the newest raw materials, industry trends and market conditions to develop and update products with your profitability, safety and efficiency in mind. Training That Meets Your Business Goals We offer three distinct types of training. Workshops keep technicians, marketers and sales people sharp. Onsite Trainings at your location bring your team together on new products, systems and processes. Certification provides Certified Firm benefits and real partnership. Technical Support When You Need It Whether you're planning for a job, or you need technical assistance while on the job, we're available by phone to bring over 17 years and 800 customer experiences to the table. Business Development Support Certified Firms are licensed on all Enviroguard product, service and process intellectual property and are factory trained and tested per service on complete marketing, sales and service implementation, business development and profit strategies. The EnviroBlog Mark Maier 1 min TRITANIUM™ PROTECTION 103 Post not marked as liked Caroline McCrorey 3 min Want to Become a Distributor? 48 Post not marked as liked Caroline McCrorey 2 min Get Suited Up for the Splash Zone! 24 Post not marked as liked 1 2 3 4 5 Enviroguard Events Market Makers 2024 Coming Soon! Enviroguard Corporate Headquarters Coming Soon! Enviroguard Corporate Headquarters, 5004 NC-105, Banner Elk, NC 28604, USA Coming Soon! Enviroguard Corporate Headquarters, 5004 NC-105, Banner Elk, NC 28604, USA Our second annual Market Makers picks up with a focus on Mold Severity Indexing, S.E.T. Sales Process Tools/Updates, New Encapsulants Line, Phoenix Coatings Liquid-Applied Roofing, Updates in Odor Removal and much, much more. +11 more RSVP Event Reviews Brands We Distribute

What is the cost of certification? There is no direct fee for certification or certification classes. The cost of certification is built into a monthly service fee which after onboarding includes: 3 Day Service-based Certification training classes Monthly marketing, sales and service support Region-based geo-tracking Are discounts available on large orders? Yes. Several years ago, we learned from our contractor customers that predictable pricing is important for producing consistent estimates and for incentivizing the production side of their business, so our discounts are based on annualized purchase volume as follows: 3% Discount (Tier 1) = Less than $4999/year 6% Discount (Tier 2) = $5000 - $9999/year 9% Discount (Tier 3) = $10,000 - $19,999/year 12% Discount (Tier 4) = $20,000 - $39,999/year 15% Discount (Tier 5) = $40,000+/year This means that whether you need a small order or large order, your price and profitability is always predictable.