A clear, non-gloss odor sealant that pre- serves the original look of surfaces when burn marks, staining or charring are not present. It also seals in tough, deeply embedded animal and cooking odors.
Seals in smoke, animal and other organic odors on semi-porous and non-porous surfaces
Nearly odorless formulation
Water-based and non-flammable
Low viscosity for use with a wide variety of application equipment
Cleans up easily with soap and water
VaporLock Clear seals tough, deeply embedded odors. As an clear coating, it is designed for restoration professionals for use in sealing smoke odors after structural fire damage. VaporLock Clear can be used as a finish/top coat over existing paints and primers (both latex and oil-based) once cleaning is complete. Other odors that it can effectively seal include: pet urine, tobacco/nicotine, marijuana, curry/cooking/food, bird/animal feces, bat guano, candles, decay, mold/musty odors. VaporLock Clear includes an EPA registered antimicrobial to inhibit the growth of mold/mildew on the coating’s surface*. It applies white and dries to a clear non-gloss finish.
*Treated Articles Exemption - This product contains an EPA registered antimicrobial to protect the coating from non-public health fungi and odor causing bacteria. No public health claims are being made.
Uses
Interior conditioned and unconditioned areas of a building including crawlspaces, basements, attics it’s structure.
Surfaces
VaporLock is used to seal most construction materials including treated and untreated lumber, OSB, particle board, masonry surfaces, concrete, brick, wall board, painted surfaces and composite construction materials. Surfaces also include sheathing, trusses, framing, joists, plates, pillars, posts, beams and studs.
Safety
Consult SDS for details
Instructions
Apply as supplied using a brush, roller or sprayer. Do not dilute. To reduce viscosity in spray applications, a small amount of water may be added if necessary. Only apply if surface, air and product temperatures are between 40°-90°F (4°-32°C). Stir thoroughly before and occasionally during use. Coat the entire surface to ensure a uniform appearance.
Coverate Rate
Suggested coverage for odor sealing is 320 ft2 per gallon (5 wet mils). For superior antimicrobial protection of the coating*, apply at 160 ft2 per gallon (10 wet mils). Results may vary based upon surface texture, porosity, age and application method. Coverage rates do not include loss from over-spray or over-use.