Description
Oxypar DC is a dry concentrated hydrogen peroxide forming stain remover and cleaner engineered specifically for remediation and restoration professionals.
Features/Benefits
- Powers through organic soiling for uncompromised deep cleaning.
- Foaming action penetrates into the smallest pores to release, lift and remove tough organic stains
- Leaves surfaces fresh and clean.
- Continues brightening and restoring surfaces to the original color for up to 24 hours
- Prepares surfaces for coatings and sealers.
Uses
Exterior surfaces where organic soil load is present.
Surfaces
Oxypar DC is used to seal most construction materials including treated and untreated lumber, OSB, particle board, masonry surfaces, concrete, brick, wall board, painted surfaces and composite construction materials. Surfaces also include sheathing, trusses, framing, joists, plates, pillars, posts, beams and studs.
Safety
PPE
- Eye & Respiratory Protection: Full Face Respirator w/ Multi-gas/Multi-vapor Combination Cartridge or Supplied Air Respirator w/ PAPR Cartridge
- Skin Protection: Chemical Resistant Gloves (Nitrile) and Coverall rated for a minimum of 4 hours and up to 8 hours based upon prolonged chemical exposure and the need for tear resistance
- Consult SDS for additional safety details
Instructions
See “React/Extract Production Protocol”.
Coverage Rate
Oxypar DC will yield 250-500 ft2. per ready- to- use gallon, based upon soiling, surface texture, porosity and application method. Coverage rates do not include loss from over-spray or over-use.
Shelf Life & Storage
24 months
