MaxGuard is a flat-white protective coating for the long-lasting protection of most construction materials in interior, exterior or high humidity areas. Once cured, it forms a durable and stain-resistant flat-white finish. MaxGuard is breathable to prevent against wet and dry rot and allows for drying if saturated in the future.
*Treated Articles Exemption - This product contains an EPA registered antimicrobial to protect the coating from non-public health fungi and odor causing bacteria. No public health claims are being made.
- Breathable to prevent dry or wet rot conditions
- Self-priming to cover stains and discoloration in one step
- Acts as a moisture barrier to prevent moisture content increases
- Forms a tough, resistant barrier to harsh environments and contaminants
- Abrasion resistant and scrubbable
- Tintable, Water-based and non-flammable
All structural surfaces especially in unconditioned and moisture prone areas such as attics, basements and crawl spaces and for post-remediation specifications
MaxGuard is used to protect most construction materials including treated and untreated lumber, OSB, particle board, masonry surfaces, concrete, brick, wallboard, composite construction materials and metals. Surfaces also include sheathing, trusses, framing, joists, plates, pillars, posts, beams and walls.
Consult SDS for details
MaxGuard is formulated as a ready-to-use coating. It can be applied with a brush, roller or airless sprayer to obtain an even finish. Do not apply past the point of run off. A cross-hatching technique is the best way to ensure sufficient wet/dry film thickness and complete coverage. Consult the Enviroguard New Construction Warranty and Enviroguard Existing Construction Warranty documents for details.
For warranted best results, apply at 160 ft2 per gallon (800 ft2 per pail = 10 wet mils) based upon location, surface texture, porosity, age and application method. For best results, apply two even coats perpendicularly to each other (i.e. vertically and horizontally). Allow the first coat to dry to the touch before the second application. Does not include loss from over-spray or over-use.
Shelf Life & Storage