top of page
White Cap Base Coat
WhiteCap Base Coat from Phoenix Coatings is self-leveling roof coating that forms that base for 10-year, 20-year, or 30-year seamless resurfacing system.
 
With the growing number of roofing materials, elastomeric roof coating's are tasked with delivering excellent adhesion and outstanding performance nomatter the substrate. WhiteCap Base Coat is a low viscosity, self-leveling elastomeric roof coating that searches out and fills gaps, cracks and crevices inorder to provide a sound foundation for the Phoenix Liquid Applied Commercial Roof System. This state-of-the-art formula maximizes WhiteCapReinforcing Fabric adhesion and lamination strength for the WhiteCap Top Coat. And it's superior tensile strength and elongation account for it'sdurability in both cold and hot climate zones.
 
Advantages
  • Excellent exterior durability
  • UV light resistance
  • Low-temperature flexibility down to -15°F (-26°C)
  • Dirt pickup resistance
  • Excellent adhesion to SPF and many other construction substrates
  • High solar reflectivity, which reduces surface temperatures,helping prolong roof life and reduce energy costs
  • High tensile strength and elongation
  • Easy application by spray, brush or roller, resulting in lowinstallation costs
  • Low toxicity and odor
  • Simple cleanup with water

White Cap Base Coat

$455.00Price
Quantity

  • 1. Prior to installation, review the Phoenix Coatings Standard Operating Procedure associated with your roof resurfacing project.

    2. Inspect and complete a Phoenix Moisture Assessment of the existing roof system for structural deficiencies and needed repairs according to local building code requirements.

    3. Repair all deteriorating membrane, ponding water areas, deteriorating seams, pitch issues, condensation lines, flashing deficiencies, and penetrations prior to installation.

    4. Clean the existing roofing substrate according to Phoenix Standard Operating Procedures and allow to dry prior to installation.

    5. Ensure that weather and temperature conditions are suitable prior to the installation of WhiteCap Base Coat.

    6. Conduct adhesion testing per Phoenix Standard Operating Procedures prior to WhiteCap Base Coat installation.

    7. If recommended in Phoenix Standard Operating Procedures, prime existing roofing substrate(s) prior to WhiteCap Base Coat Installation.

  • 1. Apply WhiteCap Base Coat at a rate of 120-130 square feet per gallon (12-14 wet mils).

    3. Allow to cure to 12 hours.

    4. Inspect WhiteCap Base Coat for defects, flaws or areas of insucient coverage, and correct unsatisfactory conditions. If necessary, correct and allow to cure before TopCoat installation.

    5. Complete the Phoenix Liquid-Applied Commercial Roofing System by applying WhiteCap Top Coat according to both labeling and Phoenix Standard Operating Procedures and Original Roof Type.

bottom of page