ReCoil NR is a non-rinse, foaming, alkaline cleaner for all forms of condenser and evaporator coils. In addition to cleaning the coils on contact, it will also clean the drain pan and remove any corrosion at the same time. It’s both non-corrosive and biodegradable and will not harm finishes associated with HVAC equipment.
HOW TO USE
DO NOT DILUTE. ReCoil NR is a ready-to-use coil cleaner. For best results, foam-apply ReCoil NR liberally and directly to coils. DO NOT RINSE. If any dirt, oil, grease, dust, corrosion or bugs remain, re-apply and allow to dry.
For hard surface cleaning, foam or spray apply ReCoil NR directly to bathroom, kitchen, concrete, tile, fixtures or other hard surfaces. Wipe or rinse clean. See SDS for personal protection recommendations. Only apply if surface, air, and product temperatures are between 40°-120° F.
ReCoil NR
Apply liberally until fully coated. Apply directly to coils. Foaming at 50PSI will help drive ReCoil completely through the coil. If possible, check the reverse side of the applied coil for complete coverage.