2.6 gallon manual or air powered, pre-mix, foam unit. Highly portable and natural color tank for easy visibility of product levels.
Features:
- Dual operation with manual pump and connection for air supply for flexibility in applications
- Connect to an air source to pressurize the unit, then disconnect and move the unit to the area to be cleaned
- Produces thick, high quality foam
- Lightweight, durable, and chemical-resistant discharge hose
- Pressure regulator and pressure relief valve for safety
- Viton seals for chemical compatibility
- Natural color tank for easy visibility of product levels
Dual-Power 2.6 gal Foam Unit
1. Ensure all air pressure is released from unit by activating the pressure relief valve.
2. Securely hold the unit and unscrew the pump assembly from the tank in a counter-clockwise motion.
3. Follow all instructions from chemical manufacturer. Fill tank 3/4 of the way with pre-mixed solution. Note: Do not overfill tank with solution.
4. Securely hold the tank and screw the pump assembly back on in a clockwise motion.
5. For use with compressed air operation: With the discharge valve in the closed position, plug an airline into the air fitting. The pressure is regulated to 40 psi with the pressure regulator. Note: The pressure relief valve will leak if the air pressure is too high. Do not overfill tank with air.
6. For use with manual operation: Pressurize the tank by pumping until it reaches desired pressure, or until air pressure gauge reads 25 psi (1.7 bar).
7. To start foaming, point the wand assembly at the area you wish to foam and squeeze the trigger handle to discharge foam. Release trigger handle to stop foaming.